Easy!!! Powerful!!! Saving!!!
Our Intelligent TFT LCD Module can be controlled by Any MCU through our Powerful & Easy Command Set (HEX Code), So many engineers from over 50 countries enjoy our Product for new project.
1. Design a group of Beautiful "Graphical User Interface" that you need.
2. Connect your equipment with our TFT-LCD Module by RS232, RS485 port or TTL Logic directly, plug and play.
3. Write a simple program for the MCU to control the TFT-LCD Module via powerful "Command Sets" (HEX Code).
That's all. Saving much development Time and Cost for Engineer.
For example: Image Command 0x70.
Send: “0xAA+0x70+ Pic_ID + 0xCC 0x33 0xC3 0x3C”
Introduction |
Example |
Note |
|
AA |
Frame head |
Frame head of one Command |
|
0x70 |
Command Code |
||
Pic_ID |
Sequence number of the current picture |
0x00 0x01 |
Show Picture - 01 |
CC 33 C3 3C |
Frame end |
Frame end of one Command |
We would offer a simple Toolbox to help you to work with
TFT-LCD Module on PC.
1. Assistant function: show how to send the Command Set to control the TFT display.
2. Download Function: Download the images and configuration files into TFT Module
3. Touch Control function: Define many buttons on the User Interface, then create a touch configuration file.
4. Font software: Create the font configuration file.
Widely Used In Many Various Industrial Field in over 50 Countries.
Physical Parameter
Size |
5.7 inch |
Resolution |
640×RGB×480 |
Pixel Spacing |
0.1905 mm × 0.0635 mm (H×V) |
Color |
65536 colors (16 bit) |
Viewing Area |
115.2 mm × 86.4 mm |
Display Dimension |
117.6 mm × 88.8 mm |
Overall Dimension |
164.2 mm × 106 mm × 16.5 mm(N)/ 25.1 mm(T) |
Net Weight |
240 g(N)/ 275 g(T) |
Display
Backlight Type |
LED |
Brightness |
700 cd/m2 (Brightness can be adjustable in 100 levels) |
Contrast |
500:1 |
Backlight life |
100,000 hours |
Viewing Angle |
80°/ 80°/ 70°/ 70°(L/ R/ U/ D) |
TFT Panel |
A+ Class Industry Panel |
Touch Screen |
Industry Level 4 wire resistance Or without touch screen is optional. |
Screen Mode： |
Digital |
Processor
CPU |
CortexM3 STM32F103 |
LCD Controller |
CPLD EPM240 |
Refresh Rate |
60 Hz |
Update Speed of per frame |
30 ms/frame (33 images/s) |
Memory
Flash Memory |
Standard 256MB, Extension 2GB |
Memory Amount for picture |
304 images, Extension 2694 |
Interface
Interface |
RS232/ RS485/ TTL UART Interface |
Image downloading |
MiniUSB2.0 (12Mbps) & SD card |
Power Supply
Rated voltage |
+12 V DC |
Permissible voltage range |
+4.5...+20.0 V DC (or Extend to +42V) |
Max. permissible transients |
+24 V (500 msec) |
Time between two transients |
50 sec minimum |
Fuse, internal |
Electronic |
Power consumption |
5.2 W |
Electrical Characteristics
Parameter |
Condition |
Min |
Type |
Max |
|
Supply Current |
VIN=5V |
580mA |
|||
VIN=12V |
320mA |
||||
VIN=20V |
260mA |
||||
Signal Input Voltage |
TTL level |
VIH |
2.1V |
||
VIL |
0.9V |
||||
RS232 level |
V range |
-15V |
+15V |
||
RS485 level |
Different Threshold |
-0.2V |
+0.2V |
||
Signal Output Voltage |
TTL level |
VOH |
3V |
3.3V |
|
VOL |
0V |
0.1V |
|||
RS232 level |
V range |
-15V |
+15V |
||
RS485 level |
Different Driver |
5V |
|||
Baud Rate |
1200 bps |
921600 bps |
|||
Note: As the brightness lower, the current will also reduce. | |||||
Ambient Conditions
|
Max. permissible ambient temperature Operation Storage |
-30℃ ～ +70℃ -30℃ ～ +85℃ |
|
Relative humidity Operation Storage |
55℃, 85% 60℃, 90% |
|
Shock loading Operation Storage |
15 g/ 11 msec 25 g/ 6 msec |
|
Vibration Operation Storage |
0.035 mm (10 - 58 Hz)/ 1 g (58 - 500 Hz) 3.5 mm (5 - 8,5 Hz)/ 1 g (8.5 - 500 Hz) |
|
Barometric pressure Operation Storage |
706 to 1030 hPa 581 to 1030 hPa |
Noise Immunity
|
Static discharge (contact discharge/air discharge) |
EN 61000-4-2 6 kV/ 8 kV |
RF irradiation |
EN 61000-4-3 10 V/m, 80% AM 1 kHz |
|
Pulse modulation |
ENV 50204 900 MHz ±5 MHz 10 V/ meff., 50% ED, 200 Hz |
|
RF conduction |
EN 61000-4-6 150 kHz - 80 MHz 10 V, 80% AM, 1 kHz |
|
Burst interference Supply lines Process data lines Signal lines |
EN 61000-4-4 2kV 2kV 1kV |
Radio Interference
|
Radio interference level complying to EN 55011 |
Class A |
Support Device
Buzzer |
Support |
RTC |
Support |
Key-board Interface |
Support User can set dot matrix for 8*8 or 4*4 |
16 IO Ports for Users |
Support |
|
USB port For Downloading Pictures & Font File |
Support (Download one 800×600 picture only take 0.5S） |
Touch Screen |
4 Wire Resistance |
Default Font |
8×8 / 16×16/ 16×32/ 12×12 / 12×24 (Dot Matrix) |
Picture |
Support BMP, JPG Format |
Storage Data |
Support |
Command Set |
Unified Simplified Command Sets |
With CPU & Driving Device |
Controlled by Any MCU |
Display Picture/ Text/ Curve via Commands |
65536 colour TFT display |
Touch Screen |
RS232/ RS485/ TTL UART Interface & USB port |
Wide voltage range |
Widely Used in many various Industrial Field |
Easy to Use! Powerful Function! Saving Cost and Time! |
Used as Touch-controller, TFT-LCD display system, etc. |
1. Pass the CE & ROHS & FCC certification, and ISO9001:2008 Quality Management System.
2. Only use the best electronic components which is produced by the would famous company,
so the repair rate is only 0.2% per year.
3. Delivery term: Within 2 weeks for all order.
Customers can choose any payment ways that you prefer, T/T is the most useful way.
Please do not refuse prepay the bank charges or other handing charges when you do the payment.
Shipping terms
1. Most powerful shipping agency, professional/fast shipping
2.Delivery time is within 3-7 business days to the worldwide normally
3.Import duties taxes and charges are not included in the item price or shipping charges.